Introducing the Dynacord CMS 1000-3 mixer
Dynacord CMS 1000-3 of Dynacord mixers has 10 input lines. This means you can connect standard 10 microphones to the inputs of this mixer.
It also has two digital effects made up of two completely separate circuits, each of which has 100 predefined effect templates and of course can be edited. This device also gives you the ability to program 20 effect patterns separately on the device.
This analog mixer has a better parametric EQ than the CMS 600-3 and you can set the kHz on the 6 input lines of this mixer.
Furthermore, using the two Fx Send outputs, you will be able to output and record the singer's raw voice separately.
This device has an 11-band stereo equalizer and four inputs via a USB connector.
Among the features that can be cited as advantages of this device over the Dynacord CMS 600-3 mixer is the existence of AUX and MON outputs in double form. In addition, the dynamic equalization of this device is advanced over the Dynacord CMS 600-3 mixer and volume (KHz) has been added to it, which makes the recorder more open to changing the voice of the singer or the praise.
One of the reasons why the Dynacord brand has a lot of fans is the good quality of this brand compared to other brands like Ecocheng. It can almost be said that if Dynacord products are used correctly; The product requires service after 5-10 years. Of course, I emphasize the correct use of the word here.
Of course, all electronics have a useful life, but the manufacturing quality of DinaCord products is truly unmatched among its competitors.
10‑channel compact mixing system
- Intuitive mixer with 10 input channels (6 Mic/Line + 4 Mic/Stereo-Line)
- 2 High-Quality editable effects, 100 factory and 20 user presets
- Professional 4×4 24-bit / 96 kHz USB interface with MIDI
- 11 band stereo graphic equalizer
- Optional robust cover-lid with integrated handle
The Compact Mixing System from DYNACORD has seized pole position in this segment of the market by virtue of the quality of its sound, components and features. By integrating a high-quality mixer, two digital effects processors of studio grade, a graphic equalizer and also a professional digital interface to PC or Mac, the CMS mixers represent the ideal solution for a large number of demanding applications in the audio sector.
The mixing section starts with 10 lowest noise, discrete microphone preamps. 6 auxiliary busses, two of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate-reverbs. A TAP key allows precise setting of delay times. Further, each preset can be edited and stored to 20 User memories.
The built in uncompromising USB audio interface shares 4 playback and 4 recording channels simultaneously with a PC or Mac, following studio standard 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package.
The 11 band stereo graphic equalizer can be routed flexible to master or monitor channels.
For dark environments an optional gooseneck light can be connected. All faders are dust protected and not least the balanced XLR outputs for master and monitor underline the professional approach.
Optional a very robust cover lid with an integrated handle is available. A solution that offers optimal protection for the device as well as greater carrying comfort without the need of adding a large, heavy flight case.
Source:
